Easter Pull Toy
Here is the original article from the
March - April 1958 Deltagram
ROCKWELL MANUFACTURING COMPANY - A DELTACRAFT PULICATION

Pieces of odds and ends found in most shops we used to make this pull toy. Trace the design on the stock using the squares method. The chick is glued and nailed to the base. The wheels are made from a 3/4-inch dowel, 1/4-inch thick. These are either nailed or screw fastened to the base. Enamel the toy in bright non-toxic colors, and paint the feature lines with black paint.

The chick body is cut on the scroll saw using a No. 59 jewelers blade with the saw running at its highest speed or 1750 r.p.m.

*********** WARNING***********
Read my page on safety before building this item.