Portable Shelf
Here is the orginal article from the
September - October 1955 Deltagram
ROCKWELL MANUFACTURING COMPANY - A DELTACRAFT PULICATION

A piece of plywood approximately 5 inches wide by 20 inches long is all the material that is necessary for making this portable shelf. It contains its own brackets and can be folded flat for storage. The brackets are cut on the scroll saw, and are fastened to the top with finishing brads. Conventional picture hanger plates, (see photo) are fastened to the top for hanging the shelf. Sand all parts smoothly and finish natural with shellac and rubbed-effect varnish, sanding between coats with 4-0 garnet paper.

*********** WARNING***********
Read my page on safety before building this item.