Knife Holder

Here is the orginal article straight from
Book No. 4506, PRACTICAL DELTA PROJECTS
NEW & NOVEL THINGS TO MAKE, BOOK 6
DELTA MFG. DIVISION

The Knife Holder has room for five kitchen knives. The front block is slotted with saw cuts and the facing edge is set back in steps which can be cut on the shaper or jointer. The top edge is sanded to a smooth curve.
* * * * * * * * * Click on any picture above to download a higher resolution picture. * * * * * * * * *

*********** WARNING***********
Read my page on safety before building this item.