Doll Cradle - The Woodcrafter Page© 2004

Doll Cradle
Here is the orginal article from the
November - December 1955 Deltagram
ROCKWELL MANUFACTURING COMPANY - A DELTACRAFT PULICATION

A DOLL CRADLE

Any little girl will be delighted to receive this toy cradle for ber favorite doll. The top portion of the cradle is made of ¼ inch plywood. ½ inch solid stock was used for the two rockers. Break all sharp corners and sand entire project with 3-0 and 6-0 garnet paper. Finish with a light oak oil stain followed by two thin coats of white or orange shellac.

**Bill Of Materials**
# Pcs	Name	Size
2	Sides	3/8 x 9¼ x 17¼
1	Back (Headboard)	3/8 x 8-9/16 x 8
1	Front (Footboard)	3/8 x 7 x 5¼
1	Bottom	3/8 x 7-5/8 x 16½
1	Top	3/8 x 8-5/8 x 10-7/8
1	Top Trim	3/8 x 7/8 x 9-1/8
2	Rockers	¾ x 3-5/8 x 12-3/8

Right-click here to download the drawing as an Adobe Acrobat (pdf) file.

* * * * Click on the drawings above to download a higher resolution picture. * * * *

*********** WARNING***********
Read my page on safety before building this item.