Serving Tray
Here is the orginal article from the
September - October 1956 Deltagram
ROCKWELL MANUFACTURING COMPANY - A DELTACRAFT PULICATION

This Tempered Hardboard tray is made up of five pieces of stock and four escutcheon pins that hold the tray together. Cut the pieces that are indicated in the drawing, making sure that you get nice tight fits on the tray side half lap joints and the foot openings in the tray base. Break all sharp corners with medium and fine sandpaper. No finish is required. Bill of Materials SERVING TRAY No. of Parts Name Size 2 Short Side ¼ x 1¾ x 8½ 2 Long Sides ¼ x 1 x 13½ 1 Bottom ¼ x 9 x 14 4 Brass Escutcheon Pins #15 x ¾"

*********** WARNING***********
Read my page on safety before building this item.