Build this
SODA BAR for the LAWN

Here is the orginal article straight from
Book No. 4514, PRACTICAL DELTA PROJECTS
NEW & NOVEL THINGS TO MAKE, BOOK 14
DELTA MFG. DIVISION

SODA BAR for the LAWN HERE is a novel bar which will add to the convenience and attractiveness of your lawn furniture. The bar is built like a wheel barrow as shown in the photographs and the drawing on the following page. The same plan may be used to build an ordinary wheel barrow which you can use in your garden work. Merely leave out the center racks and fasten the one side solid instead of hinging it. The only special treatment in this project is the construction of the wheel. The rim is made in three layers which are glued and nailed together as shown in the drawing detail. The hub is cut into a hexagon shape on the circular saw, after which it is chucked in the lathe and the end corners are turned round. The spokes are doweled to the hub and the rim is then fastened with screws to the ends of the spokes. The original was finished with outside white paint and decorated with appropriate decals.

*********** WARNING***********
Read my page on safety before building this item.